Liquid Image Ego Firmware Update (ver. 3.3.1.0)

Posted by in Liquid Image . 0 Comments.

There is a new firmware update (ver. 3.3.1.0) available for the Liquid Image Ego.

You can download the firmware from this link: Firmware Update

To apply the firmware, first download the firmware file and save it to your desktop so it is easily accessible. Extract the file (.bin) with unzipping software (WinZip, WinRar, UnRarX etc).

If you downloaded the file from us it will already be named correctly (firmware.bin) however if you download it from another site, make sure the file name is correct.

You can either connect your Ego via USB with the SD card inserted into the device or you can insert the micro SD card into the Computer directly.

Now copy the file into the Root Drive of the SD card where the DCIM folder is located. Make sure to drop the file outside of the DCIM folder and not in it.

Once the file has been copied to the SD card you may now disconnect the Ego or/ if SD card was inserted into CPU directly, remove SD card and insert into Ego.

While Ego is powered off, press and hold the shutter button then press and hold the power button.

Continue holding both buttons until the Ego beeps and “UP” is displayed in the LCD window.

Once “UP” is displayed, you can release the buttons. It should take about  10-30 seconds for the update complete. Once the update is complete, the Ego will power off.

You can view your current Firmware Version by connecting your Ego Via WIFI to your mobile device using the Liquid Image App.

In the Liquid Image App , go to Settings> about. You should then be able to view your current firmware for your Ego.

If you have any questions or need assistance with the update, please do not hesitate to contact us!

Tags: ego, firmware

Comments

Leave a Comment

Leave a Reply

* Name:
* E-mail: (Not Published)
   Website: (Site url with http://)
* Comment:
Verification code:
M9Media 2014